XM-LECG is a fixed female receptacle from the XMOST B Series, designed for panel installation using a twin-nut mounting system. This configuration features 90° right-angle male pins for direct connection to a printed circuit board.
The threaded connector body passes through the prepared panel opening and is secured with two mounting nuts, providing stable mechanical retention. The right-angle PCB pins allow the terminals to extend parallel to the mounting panel, supporting equipment layouts where straight rear PCB pins are not suitable.
The Push-Pull mating interface enables compatible plugs to be connected quickly without tools while maintaining secure self-latching retention. The standard G key ensures accurate alignment, while alternative A–M keying options help prevent cross-mating.
The female designation refers to the connector mating interface. The right-angle male pins are the rear PCB terminals.
Product Features
- Fixed female receptacle for panel installation
- Secure twin-nut mounting system
- 90° right-angle male pins for PCB connection
- Suitable for PCB layouts requiring parallel terminal routing
- Compact panel and bulkhead interface
- Push-Pull self-latching mating interface
- Standard G key for accurate alignment
- Alternative A–M keying options
- Available in shell sizes from 00B to 3B
- Suitable for industrial and electronic equipment
Dimensions
| Shell Size | A | B | Mounting Thread M | L2 | L3 | L4 | SW1 | SW3 |
| 00B | 8 | 10.2 | M7 × 0.5 | 13.7 | 2.5 | 2.5 | 6.3 | 9 |
| 0B | 12 | 12.5 | M9 × 0.6 | 16.6 | 4.5 | 2.5 | 8.2 | 11 |
| 1B | 16 | 16.0 | M12 × 1.0 | 18.7 | 6.0 | 3.2 | 10.5 | 14 |
| 2B | 20 | 19.5 | M15 × 1.0 | 18.0 | 6.5 | 3.5 | 13.5 | 17 |
| 3B | 23.9 | 25.0 | M18 × 1.0 | 22.5 | 8.0 | 4.5 | 16.5 | 22 |
Recommended Panel Cutout
| Shell Size | Flat-to-Flat Width | Cutout Diameter |
| 00B | SW 6.4 | Ø7.1 |
| 0B | SW 8.3 | Ø9.1 |
| 1B | SW 10.6 | Ø12.1 |
| 2B | SW 13.6 | Ø15.1 |
| 3B | SW 16.6 | Ø18.1 |
All dimensions are in millimetres.
Applications
XM-LECG right-angle PCB receptacle is suitable for:
- PCB-based industrial control systems
- Test and measurement instruments
- Medical electronic equipment
- Robotics and automation controllers
- Communication equipment
- Broadcast and audiovisual systems
- Compact electronic enclosures
- Equipment requiring right-angle PCB termination
Contact arrangements, PCB pin layouts, materials and keying options may vary according to the selected shell size and application requirements.
