XM-LPKG is a B Series fixed female receptacle designed for nut-mounted panel installation. Unlike receptacles with exposed rear contacts for direct PCB connection, this model incorporates a rear cable clamp to securely retain the connected cable.
The mounting thread and retaining nut provide stable installation on an equipment panel, while the cable clamp helps reduce cable movement and mechanical stress at the connector entry.
Its straight female mating interface is compatible with corresponding B Series Push-Pull male plugs, enabling fast, secure and tool-free connection. The standard G key ensures correct connector alignment, while optional A–M and R key configurations help prevent cross-mating between similar connectors.
Product Features
- Fixed female receptacle for panel installation
- Secure nut-mounted retention
- Integrated rear cable clamp
- Straight female mating interface
- Compatible with the B Series Push-Pull self-latching system
- Fast, secure and tool-free mating
- Standard G key for correct alignment
- Optional A–M and R key configurations
- Available in shell sizes from 00B to 3B
- Metal shell supporting 360° EMC shielding when correctly assembled and mated
Dimensions
All dimensions are in millimetres.
| Shell Size | A | B | Mounting Thread M | L1 | L2 | L4 | SW1 | SW2 | SW3 |
| 00B | 8 | 10.2 | M7 × 0.5 | 25 | 6.5 | 1 | 6.3 | 5 | 9 |
| 0B | 10 | 12.3 | M9 × 0.6 | 35.5 | 7 | 1.2 | 8.2 | 7 | 11 |
| 1B | 14 | 16 | M12 × 1.0 | 40.5 | 7.5 | 1.5 | 10.5 | 9 | 14 |
| 2B | 18 | 19.2 | M15 × 1.0 | 47 | 8.5 | 1.8 | 13.5 | 13 | 17 |
| 3B | 22 | 25 | M18 × 1.0 | 56 | 11.5 | 2 | 16.5 | 15 | 22 |
Recommended Panel Cutout
| Shell Size | Flat Width SW | Cutout Diameter |
| 00B | 6.4 mm | Ø7.1 mm |
| 0B | 8.3 mm | Ø9.1 mm |
| 1B | 10.6 mm | Ø12.1 mm |
| 2B | 13.6 mm | Ø15.1 mm |
| 3B | 16.6 mm | Ø18.1 mm |
Typical Applications
- Industrial control panels
- Test and measurement instruments
- Medical and laboratory equipment
- Automation and robotic systems
- Communication equipment
- Panel-mounted cable assemblies
- Industrial signal transmission systems
Final contact configuration, keying option, cable diameter, termination method and dimensional requirements should be confirmed according to the selected part number before ordering.
